Clark Forklift Manual
Sick of hunting the web for Clark Forklift Manual inside information? My intention here is to give you ladies and gents the full history and run down on forklift and
Clark Forklift Manual related subject matter.
I've been in the big equipment and lifts
renewing business for longer than I care to admit and have fixed up many types and
brands of forklifts. I have the low down, the good the bad and the ugly about
Clark Forklift Manual web pages and I explain it all right here for you guys and gals with the most
relevant inside information I can provide.
The forklift is one of the workhorses of modern workforce.
Manufacturing places, warehousing, distributing centers, and many commercial applications depend on forklifts of many different types and sizes to keep daily work
running evenly. Other businesses only need a forklift to unload deliveries for less than a few hours a day. Either way, having a forklift that can perform well for your specific
needs is an important component.
Click... Clark Forklift Manual
to get to the main page and find more related, detailed data.
Forklifts sometimes named for the L-shaped forks
typically used to lift shipping pallets, but they can be
outfitted with different accessories for picking up spools, drums, or other specific loads
too. Also called lift trucks they are available for both indoor and outdoor
applications and can carry loads of 1k lbs
to 30,000 lbs or more. If your usual load is less than 250 lbs, a pallet jack or hand truck is probably a
more economical choice.
Obtaining a forklift is a huge investment for small businesses,
and you need to make sure you get one that can handle your requirements without
wiping out your budget.
Until you're looking at forklifts or chatting with dealers, you need to determine exactly what you need the forklifts to do. These would be important questions to ask before you start comparison shopping:
-How heavy and what size are your typical loads?
-How high do you need to lift the load?
-Will you be using it indoors, outdoors, or both?
-How much room do you have to maneuver? How wide are your narrowest aisles?
-How many hours per day will it be used?
-These answers will help you determine exactly what kind of forklift you need.
Important Forklift Facts:
There are two types of tires to choose from: cushion tires, which are made of solid
rubber, and pneumatic tires, which are inflated with compressed air. For internal
applications, cushion tires are the best choice; for outdoor work, you may want more
expensive pneumatic tires.
A third option, solid pneumatic tires, are ideal for outdoor environments where
there is a high risk of popping regular pneumatic tires: lumber yards or recycling
centers where nails or glass can be scattered around. They combine the solid-rubber
construction of cushion tires with the rough terrain capabilities of pneumatic tires, and
typically are more expensive than the other two types.
Clark Forklift Manual
Parts of a Forklift:
1. The whole machine, which is a motive machine with wheels powered through a
transmission and drive train.
2. An LPG, gasoline or diesel fueled internal combustion engine, or a battery-powered
3.The counterweight, which is a heavy iron mass attached to the rear of the machine,
necessary to compensate for the load. In an electric forklift, the large lead-acid battery
itself may serve as a counterweight.
The mast, which is the vertical assembly that does the work of raising, lowering, and
tilting the load; the mast is hydraulically operated and consists of a cylinder and
interlocking rails for lifting and lowering operations and for lateral stability.
4. The lift carriage, which comprises flat metal plate(s) and is moved along the mast by
means of chains.
5. Forks, which are the L-shaped members that engage the load. The back vertical portion
of the fork attaches to the carriage by means of a hook or latch; the front horizontal
portion is inserted into or under the load, usually on a pallet. Alternatively, a variety
of other equipment is available, including slipsheet clamps, carton clamps, carpet rams,
pole handlers, and others.
6. The loads backrest, which is a rack-like extension attached to the carriage to
prevent the load from shifting backward.
7. The driver's overhead guard, which is a metal roof, supported by posts, that helps
protect the operator from any falling objects.
8. The cab, with a seat for the operator and pedals and switches for controlling the
machinethe cab is typically open and bounded by the cage-like overhead guard
Important Tips To Remember:
Keep up with training.
OSHA training may seem like an unnecessary hassle and expense, since the rules are not
strictly enforced. However if you have a fork lift accident, OSHA will investigate your
training and licensing procedures and can levy significant fines if you have not followed
all the procedures.
Know your capacity.
Attachments like sideshift, adjustable forks, and spool handlers reduce load capacity of
fork lifts. Every fork lift should have a capacity plate attached to it detailing what its
capabilities are in its current configuration.
Try different brands...
If you arent familiar with fork lifts, I strongly recommend renting a couple of
different models for a month each. You will be able to get a much better sense for the
strengths and weakness of different types of lifts.
but stick with one brand once you decide.
If you plan to buy multiple fork lifts, standardizing on one brand gives you the
advantage of dealing with one dealer for all your warranty and repair needs. Your
operators will also benefit by not having to learn the control and handling quirks of
multiple types of fork lifts. In some cases, this may not be possible, since not every
manufacturer makes every type of fork lift and you may need multiple specialized machines.
Monday, 06-Jul-2015 12:45:46 CDT