Clark Forklift Repair
Hunting the web for Clark Forklift Repair results? My intention here is to hand you ladies and gents the thorough history and run down on forklift and
Clark Forklift Repair related data.
I've been in the big equipment and lifts
rebuilding business for quite a few years and have fixed up many types and
manufacturers of forklifts. I understand the pro's and con's, the good the bad and the ugly about
Clark Forklift Repair insiders info and I show it all right here for people with the most
relevant results I can furnish.
The forklift is one of the workhorses of todays commercial and industrial sector.
Manufacturing places, warehousing, distributing centers, and many commercial applications depend on forklifts of many different types and sizes to keep daily work
running easily. Other businesses only need a forklift to unload deliveries for less than a few hours a day. Either way, having a forklift that can perform well for your specific
needs is neccessary.
Click... Clark Forklift Repair
to get to the main page and find more related, detailed info.
Forklifts sometimes named for the L-shaped forks
typically used to lift shipping pallets, but they can be
outfitted with different accessories for picking up spools, drums, or other specific loads
too. Also called lift trucks they are available for both indoor and outdoor
applications and can handle loads of 500 lbs
to 30,000 lbs or more. If your usual load is less than 1,500 lbs, a pallet jack or hand truck is probably a
Getting a forklift is a gigantic investment for small businesses,
and you need to make sure you get one that can handle your requirements without
Before you're even looking at forklifts or talking to any dealer, you need to determine exactly what you need the forklifts to do. Some questions you need answered before you start comparison shopping:
-How heavy and what size are your typical loads?
-How high do you need to lift the load?
-Will you be using it indoors, outdoors, or both?
-How much room do you have to maneuver? How wide are your narrowest aisles?
-How many hours per day will it be used?
-These answers will help you determine exactly what kind of forklift you need.
Important Forklift Facts:
New vs. used
Deciding whether you will buy a new or used forklift is a good place to start narrowing
your options. A good refurbished or reconditioned forklift is a great choice to save money.
Forklifts that are used more than 4 hours per day are major part of your operation. With
this much use, the operating and maintenance costs for bad equipment can quickly wipe out
the initial savings you gained.
If the lift truck will be used only a couple of hours per day, you can probably benefit
from buying a used truck. When the dealer gets a used lift truck back at the end of a
lease, they usually recondition it with a new paint job, new tires, a thorough engine
tune-up, and any other mechanical repairs that need to be made, so you can feel reasonably
confident in the condition of the truck. As-is trucks can save you even more
money, but may have original paint, worn tires (unless otherwise noted)
Many dealers offer both new and used forklifts, so you can compare prices easily. Make
sure to inquire about the difference in service plans between new and used models.
Clark Forklift Repair
Parts of a Forklift:
1. The whole unit, which is a motive machine with wheels powered through a
transmission and drive train.
2. A gasoline, lpg, or diesel powered engine, or a battery-powered
3.The counter-weight, which is a heavy iron mass attached to the rear of the machine,
necessary to compensate for the load. In an electric forklift, the large lead-acid battery
itself may serve as a counterweight.
The mast, which is the vertical assembly that does the work of raising, lowering, and
tilting the load; the mast is hydraulically operated and consists of a cylinder and
interlocking rails for lifting and lowering operations and for lateral stability.
4. The carriage mast, which comprises flat metal plate(s) and is moved along the mast by
means of chains.
5. Forks, which are the L-shaped members that engage the load. The back vertical portion
of the fork attaches to the carriage by means of a hook or latch; the front horizontal
portion is inserted into or under the load, usually on a pallet. Alternatively, a variety
of other equipment is available, including slipsheet clamps, carton clamps, carpet rams,
pole handlers, and others.
6. The load back rest, which is a rack-like extension attached to the carriage to
prevent the load from shifting backward.
7. The driver's overhead guard, which is a metal roof, supported by posts, that helps
protect the operator from any falling objects.
8. The cab, with a seat for the operator and pedals and switches for controlling the
machinethe cab is typically open and bounded by the cage-like overhead guard
Important Tips To Remember:
Be up to date with training.
OSHA training may seem like an unnecessary hassle and expense, since the rules are not
strictly enforced. However if you have a fork lift accident, OSHA will investigate your
training and licensing procedures and can levy significant fines if you have not followed
all the procedures.
understand your lifting limit.
Attachments like sideshift, adjustable forks, and spool handlers reduce load capacity of
fork lifts. Every fork lift should have a capacity plate attached to it detailing what its
capabilities are in its current configuration.
Try more than one brand...
If you arent familiar with fork lifts, I strongly recommend renting a couple of
different models for a month each. You will be able to get a much better sense for the
strengths and weakness of different types of lifts.
but stick with one brand once you decide.
If you plan to buy multiple fork lifts, standardizing on one brand gives you the
advantage of dealing with one dealer for all your warranty and repair needs. Your
operators will also benefit by not having to learn the control and handling quirks of
multiple types of fork lifts. In some cases, this may not be possible, since not every
manufacturer makes every type of fork lift and you may need multiple specialized machines.
Wednesday, 29-Jul-2015 08:26:45 CDT